2023 M-SPORT FORD PUMA RALLY1. 1/8 RTR 4WD
**Battery and charger are not included**
**Recommend 2S – 3S Lipo Battery**
Item # 8999
Features:
* ESC
– 100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (powered by HobbyWing).
– 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
– Water-Proof and Dust-Proof for All Weather.
– Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
– Built-In Capacitor Module.
– Automatic Throttle Range Calibration.
– Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
– Over-Heat Protection and Throttle Signal Loss Protection.
– 5 Levels of acceleration/punch.
– 9 Levels of maximum brake force.
* Motor
– CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).
* Servo
– 12Kg Metal Gear Servo (By Savox).
4.8V – 0.26 sec/60° 10.0 kg-cm.
6.0V – 0.23 sec/60° 12.0 kg-cm.
With 25T Horn Gear Spline.
* Radio System
AMP-30 TX 3-Channel Transmitter.
Frequencies: 2.4GHz.
– Digital Trimming.
– Steering Dual-Rate (ST D/R) Adjustment.
– End Point Adjustment (EPA).
– Build in Failsafe.
Power Supply: 4 – AA Alkaline (Not Included).
AMP30 RX 3-Channel Receiver.
Frequency: 2.4GHz.
Power Supply: DC 4.8 ~ 6.0V.
Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).
Body:
– Official Licensed 2023 M-Sport Ford Puma Rally 1 Edition
– Fully Detailed Injection-Molded Body Accessories Body Details
Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)
Chassis:
– 3mm Aluminum Chassis
– Front and Rear 3mm Aluminum Shock Towers
– Aluminum Arm Brace
– Full Precision Ball Bearing Support
– Wider Body Mount Positions for Better Support
– Front Skid plate with Durable Foam Bumper
– Injection-Molded Rear Diffuser
– Easy Access Battery Tray
– Battery Tray Size 142mm x 48mm
Suspension:
– Aerodynamic Lower Arm Suspension Design
– Big Bore Oil Filled Adjustable Coil Over Shocks
– 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft
– Racing Spring
– Adjustable Turnbuckles
– Adjustable Wheelbase +/- 6mm
Gear Ratio:
– Spur / Pinion 46/14T 3.29:1
– Ring & Pinion 40/17T 2.35:1
Drivetrain:
– Full Time 4-Wheels Drive
– Center Shaft Drivetrain for more power transferred to the wheels
– Metal Transmission Gears
– Aluminum Adjustable Motor Mount
– Oil Filled Two Differential Drive System
– Center Direct Drive
– Hight Efficient Transmission System
– 6 Gear Bevel Gear Type Differential
– Front / Rear Harden Steel Dog Bone and outdrives
Wheel: High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.
Tires: High Performance Racing Rubber Compound Tires 56 x 80 x 35.50 mm.
Specs:
Chassis Length: 18.11 inches (460mm)
Chassis Width: 9.06 inches (230mm)
Wheelbase: 11.80 inches (300mm)
Ground Clearance: 0.98 inches (25mm)
Weight: 5.51 lb. 2.5k
Reviews
There are no reviews yet.